> ## Content Index
> Fetch the complete content index at: https://kj5shu.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# The Random-Wire Antenna
- URL: https://kj5shu.com/random-wire/
- Published: 2026-11-21T04:12:57.000Z
- Updated: 2026-11-21T06:10:48.000Z
- Author: Graham Pointer
- Tags: Build Journeys

[← All Build Journeys](https://kj5shu.com/build-journeys/)Project 03 · Research and experimentation

How Much Can I Do With a Piece of Wire?

I have a lot of wire.

That's probably an understatement.

Between the repair shop, networking equipment, old projects, and various things I've taken apart over the years, wire is one resource I'm not likely to run out of.

Which raises an obvious question.

How much of an HF antenna can I build using what I already have?

## The appeal of random wire

The idea is appealingly simple.

Put a length of wire in the air, connect it to an appropriate matching arrangement, and see what frequencies you can use.

Of course, the more I learn about radio, the more I realize that the phrase "just a piece of wire" can hide quite a bit of complexity.

Wire length matters.

Impedance matters.

Counterpoises, matching networks, feed lines, and installation geometry all matter.

And making the tuner show an acceptable SWR isn't necessarily the same thing as radiating efficiently.

My experience with the EFHW has made that last point painfully clear.

## Using what I have

I've considered using wire recovered from other projects, including conductors from CAT5 or CAT6 cable.

To me, that's exactly the kind of material worth experimenting with.

It may not be the ideal choice for every antenna, but if it's sitting in a box doing nothing, I'd like to know whether I can put it to work.

I'd rather learn through building and measuring than simply assume a material won't work.

## The plan

I want to experiment with different lengths, feed arrangements, and installation configurations.

The antenna analyzer should help tremendously with this.

My plan is to document what I try, what the measurements show, and whether the results translate into actual contacts.

This one is still very much a work in progress.

And that's fine.

Not every project has to start with a finished design.

Sometimes the whole point is seeing what happens.

## Parts I used (and things still on the list)

- Salvaged wire, mounting hardware, feed/matching system to be determined

Additional specific part links and photos will be added as the builds progress.

[← All Build Journeys](https://kj5shu.com/build-journeys/)